OBP Upgrade jetzt noch einfacher

Author: | Posted in hardware, server No comments

OBP Upgrade geht jetzt noch einfacher, direkt vom OS aus. Es soll bereits seit einigen OBP Releases verfügbar sein, ich hab allerdings erst kürzlich davon gehört. Man sollte allerdings beachten, dass nach dem ausführen des Scripts sofort ein Reboot durchgeführt wird.

Der Output von einer Sun Fire V240.

# ./unix.flash-update.SunFire240.sh

Flash Update 2.4: Program and system initialization in progress...

Current System Flash PROM Revision:
 -----------------------------------
 OBP 4.18.5 2005/10/21 17:55 Sun Fire V210/V240,Netra 210/240

Available System Flash PROM Revision:
 -------------------------------------
 OBP 4.22.28 2007/03/01 07:08

NOTE: The system will be rebooted (reset) after the firmware has been updated.
 However, if an error occurs then the system will NOT be rebooted.

Do you wish to update the firmware in the system Flash PROM? yes/no : yes

Erasing the top half of the Flash PROM.
 Programming OBP into the top half of the Flash PROM.
 Verifying OBP in the top half of the Flash PROM.

Erasing the bottom half of the Flash PROM.
 Programming OBP into the bottom half of Flash PROM.
 Verifying OBP in the bottom half of the Flash PROM.

Erasing the top half of the Flash PROM.
 Programming POST into the top half of Flash PROM.
 Verifying POST in the top half of the Flash PROM.

The system's Flash PROM firmware has been updated.

Please wait while the system is rebooted...

Shutdown started. Fri May 25 11:54:36 MEST 2007

Add Your Comment